G·Profile

LED Technology
This tough and reliable LED luminaire includes a powerful 750W RGB LED engine capable of deep saturates and smooth color transitions. Because of its impressive blue and red output, the G-Profile is able to generate color palettes with warm pale hues and bright cold tones, but also outstanding magentas and cyans. The LEDs expected lifetime is 50,000 hours.

Colors
The G-Profile is one of the brightest and most accurate luminaires ever made in terms of color output. It was designed to match all the colors present in the SGM range, but also to impact the audience with a calibrated white available in all color temperatures from 2000K - 10000K. When it comes to solid colors, the G-Profile outperforms any discharge lamp with CMY color mixing, no matter the wattage.

Framing
With the advanced and adjustable framing shutters, the G-Profile is able to perform beam-shaping images and projections. Each of the four individually controllable blades is adjustable +/- 30º, while the module is rotatable through +/- 45º rotation.

Gobos
The G-Profile still provides the option of combining framing techniques with five rotating gobos and opens for gobo animation and interaction when framing is used. This is a perfect appliance for theatres and architectural installations. The gobo projection is very sharp and detailed, with no hotspots in the centre of the beam. The G-Profile uses glass gobos not affected by the heat, so the pattern is always fully focused.

Optics
With an 8° to 43°º zoom range, plus an additional pseudo zoom down to 1º, the G-Profile is ready for any stage or event. Being water, dirt, and sand proof, the internal optics are always clean to get the maximum brightness from the light source. Worst case scenario, the front lens must merely be wiped off, which is a huge time and cost saver, effectively eliminating the need for cleaning and maintenance.

Optional additional gobo module
By replacing the supplied G-Profile module with an optional G-Spot module, it is possible to alter the capabilities of the G-Profile by adding an additional gobo wheel, thus, doubling the gobo selection from five to ten. After the change, the unit only needs a firmware update to transform it into a G-Spot.

IP rating
The durable IP65-rating of the G-Profile luminaire ensures that the fixture is kept free of externally induced particles and liquids on internal optics and light sources, such as smoke fluid, dust, dirt, airborne pollution, and humidity. Thereby, the need to clean optics or gobos is eliminated and no internal corrosion will occur. It is ideal for outdoor applications, while being practically maintenance-free, making it a sustainable and long-lasting choice for indoor events and installations as well.

Dehumidification
The internal built-in dehumidifier protects this fixture from moisture, pollution, and any other factors that can The internal built-in dehumidifier protects this fixture from moisture, pollution and any other factors that can generate corrosion. The patented SGM dehumidification not only removes humidity but also prevents oxidation and condensation, while a gore-tex membrane equalizes internal pressure to prevent leaks. Learn more about dehumidification

Photometrics
The G-Profile delivers a staggering lumen output not only in white but also in color. It is able to achieve 4663 lumen in red, 3571 lumen in green and 1446 lumen in blue. These high values convert the G-Profile into the perfect companion, not only in medium-sized venues, but also in large-scale tours and theatre performances for huge audiences.

Thermal management
To achieve optimum performance of the LEDs at all times, this bright and accurate luminaire is optimized to manage heat impact through SGM's unique thermal management technology. The technology consists of a uniquely designed body and heat sink, which ensures optimal cooling of the LED chips. Additionally, the special aluminum alloy and surface treatment ensures maximum heat dispersion while the fan-assisted cooling ensures optimal performance at any time and under any conditions (such as variable temperatures, limited airflows, confined installation spaces, etc.).
Like all SGM LED products, the G-Profile consists of SGM's superior thermal management technology and tested under extreme hot and cold conditions, which ensures that the LEDs always operate within safe parameters. Learn more about SGM thermal management

Mounting options
The G-Profile can be rigged with the included easy-fit omega brackets with ¼ turn fasteners, using two of the four locking points. Installation time can be saved onsite as the fixtures can be pre-rigged to HUD truss, making the rig fly-ready when reaching the venue. Handles can be found in the base as well to help users mount the fixture.

Included SGM technologies

ThermalDrive^TM
This thermal management techonology provides Advaced Temperature Control monitored via sensors and software, keeping optimal LED junction temperatures, and ensuring maximum reliability for long-term use. SGM's predictive color mixing algorithm compesates the decay levels of color-based LEDs for superior color rendering. Finally, the ThermalDrive^TM system includes cutting-edge heat removal via passive thermal tecniques and active forced-air cooling (depending on the product), specifically designed to maintain LED efficiency while extending fixture's lifetime.

TruColor^TM
SGM uses Full Range Calibration in all LED fixtures over CIE space and black body curve, measured via spectrometer and SGM Illumination Lab software. The consistency of each product and its lifetime expectancy is monitored throught inbuilt sensors to compensate color shifting and to allow color temperature re-calibration. To provide the best user experience, SGM's Color Match procedure ensures accurate wavelength reproduction within the product range via colored LEDs, dichroic filters, or CMY mixing (depending on the product); all of them specified to match the SGM color palette.

DryTech^TM
SGM's integrated patented Dehumidification process eliminates humidity and breaks down corrosive molecules deriving from polluted air to avoid destructive corrosion. Inbuilt dehumidifiers constantly remove trapped hydrogen from inside of the lighting fixture in a solid estate electrolytic process with no moving parts. The DryTech^TM procedure is also based on a Ingress Protection rating of 65 or 66 (depending on the fixture), intended as a full protection against dust and other particles, while ensuring protection against direct water jets.