- IP65-rated RGB pixel LED light source
- 7 LED balls per 0.85 m string
- Full 360º viewing angle
- Maximum length of 6.8 meters (56 balls) per output
- DMX control through TLD-612A / ILD
- 120 mm pixel pitch
- Practically maintenance-free
- Flexible cable between spheres
The LB-100 is a pixel product designed to generate impressive effects for outdoor or indoor video and light curtains. It is fully prepared for pixel mapping and media control. These semi-transparent IP65-rated LED balls can be viewed from any angle and can, therefore, be used to create alluring 3D spatial effects. This makes them suitable for a wide range of applications, including touring, TV scenography, theme parks, exhibitions, video art, clubs, shopping malls, or just about any fixed or temporary installation.
- Connection Diagram
- Dimension Drawing
Please go to Download
Each LB-100 product contains seven white LED balls with a diameter of 28 mm. Each ball mounts a 2W RGB LED. In order to configure and control up to six strings of linked balls, a SGM TLD-612A or ILD driver is needed. The LEDs expected lifetime is 50,000 hours hours.
The LB-100 can be operated by TLD-612A or ILD drivers. An entire system can be controlled via DMX-512A, a dedicated video server, or an ordinary PC with ArtNet™(the ArtNet signal is then distributed by a third party ArtNet to DMX Converter).
To setup the full configuration of the LB-100, SGM offers the ArtNet Configurator, an extremely powerful software. The ArtNet Configurator offers the possibility of configuring ArtNet and DMX-512A to fit the selected controlling system when using TLD-612A or ILD drivers with LB-100 units. This software is also compatible with the SGM A-4 ArtNet to DMX converter.
The durable IP65-rating of the LB-100 ensures that the units are kept free of externally induced particles and liquids, such as smoke fluid, dust, dirt, airborne pollution, and humidity. It is ideal for outdoor applications, while being practically maintenance-free makes it a sustainable and long-lasting choice for indoor events and installations.
Up to six LB-100 input connectors can be directly wired to a TLD-612A, and those can be hung with regular clamps or just be attached to a surface. Each LB-100 output can be connected to a new LB-100. Up to eight LB-100 (56 LED balls) can be connected in one single string, which means that up to 48 LB-100 (336 LED balls) can be controlled by one single TLD-612A driver. Each LB-100 string can extend to a maximum length of 6.8 meters. Since the LB-100 cable is flexible, the balls can be hung in almost any position.
Specifications & datasheets
|LED expected lifetime||50,000 hours|
|Lightsource||7 x 2 RGB LEDs|
|Pixel Pitch||120 mm|
|Light output all LEDs on||77 lm|
|Lumen per kilogram||546 lm / Kg|
|Lens material||Silicone rubber encasement|
|Net dimensions||850 x 28 mm|
|Net dimensions inches||33.5 x 1.1 inches|
|Net weight||0.141 kg (0.3 lbs)|
|Other||Can be extended to form a string of maximum up to 6.8 meters|
|DC power, nominal||12 VDC|
|Typical power consumption||7.4 W|
|Programming and Control|
|DMX channels||21 channels pr. string of 7 pixels|
|DMX data in/out||Female locking 4-pin RS-765 / Male locking 4-pin RS-765|
|Rigging possibilities||Mounting by 4-pin RS-765 connector|
|Humidity (max.)||98 %|
|Temperature range, Operating||-40°C to 50°C|
|Temperature range, Start-up||-20°C to 50°C|
|Temperature range, Storage||-40°C to 80°C|
|Total Heat Dissipation, Typical Power||25.2 BTU per hour|
|Included items||LB-100 LED Ball, 0.85mtr. (7 pixels)|
|CE - 2014/30/EU: EMC Directive||EN 61547|
Certifications & classifications
|Product name||Item number|
|LB-100 LED Ball, 0,85m.||80080001|
|LT·100/LT·200/LB-100 Extension Cable||83062063|